P 1

Ref. 147110

Technical data

Weight 1,80 kg

Profi Energiser

Performance

Stored energy 0.7 J
Max. output energy 0.5 J
No-load voltage 8300 V
Voltage at 500 ohms 4400 V
Voltage at 100 ohms 1600 V
Max. power consumption at 12 V (mA) 60 mA
Power input at 230 V (W) 1 W

Max. fence length (multiple wires) for animal that are easy to herd

No vegetation 5 km
Little vegetation 3 km
Normal vegetation 2 km

Max. fence length (multiple wires) for animal that are difficult to herd

No vegetation 2.5 km
Little vegetation 1.5 km
Normal vegetation 1 km

Equipment

Energiser monitoring indicator
Deep discharge protection

Earthing

No. of 1 m earth stakes (min.) 1

Multi-Voltage Energisers (12 / 230 V) of the Profi series:

Universally applicable energisers!

With the Multi-Voltage Energisers of the Profi series you can cover almost all conceivable application areas. The electronic of the energiser works with 12 V supply voltage. With the provided 12 V battery lead set it can be connected directly to a 12 V battery. If used as a mains energiser it will operate with an external mains adaptor connected to the 230 V mains supply.

For short fences with light vegetation for cattle, horses and domestic animals
Deep discharge protection
Including 230 V mains adaptor and 12 V connection cable
Stored energy: 0.7 joules

Product reference

Do not use a cable reel outdoors in order to connect the energiser to the mains system

Practical tip

If used as a 12 volt energiser:
With the provided 12 V battery lead set it can be connected directly to each 12 V battery. The energiser is either mounted directly on the fence wire, on the fence post or in a carry box.
If used as a mains energiser:
It will operate with the provided external mains adaptor connected to the 230 V mains supply. When used like this,
the energiser including the mains adaptor need to be installed in a dry location, non firehazard buildings or below insufficient cover.
Do not use a cable reel outdoors in order to connect the energiser to the mains system.