Suitable for

Please adhere to the local and national installation regulations (e.g. EN1717, DIN VDE0100)

Frost Protection Heater Cable

Frost Protection Heater Cable, Length 1 m, 16 W

Ref. 380010

Ref. 380010	Frost Protection Heater Cable, Length 1 m, 16 W
Ref. 380022	Frost Protection Heater Cable, Length 2 m, 32 W
Ref. 380040	Frost Protection Heater Cable, Length 4 m, 64 W
Ref. 380080	Frost Protection Heater Cable, Length 8 m, 128 W
Ref. 380120	Frost Protection Heater Cable, Length 12 m, 192 W
Ref. 380140	Frost Protection Heater Cable, Length 14 m, 224 W
Ref. 380180	Frost Protection Heater Cable, Length 18 m, 288 W
Ref. 380240	Frost Protection Heater Cable, Length 24 m, 384 W
Ref. 380360	Frost Protection Heater Cable, Length 36 m, 576 W
Ref. 380480	Frost Protection Heater Cable, Length 48 m, 768 W

Technical data

Length 1 m

Frost Protection Heater Cable

Prevents the water pipes from freezing in frosty conditions
Typical heat output 16 W per metre
Thermostat (plug-in ready): switch-on temperature 3° C, switch-off temperature 12° C
Spiral excess lengths around the end of the pipe (minimum clearance between loops 15 mm)
Protection grade IP X7 (protection against temporary immersion)

230 V connection, with three-pin plug
With thermostat
Max. 16 W / m (at 0° C)
2 m supply cable and plug
FI circuit breaker 30 mA required on site
Protection grade IP X7
Switch on at 3° C and switch off at 12° C

Product reference

Under no circumstances should this heater cable be shortened

Practical tip

Protect water and heating pipes against browsing! You can use our two pipe protection models 380108 and 380119 for this purpose.

When using heating cables, the water pipes should be suitable for hot water.

When using plastic pipes, our aluminum tape (ref. 351181) ensures optimum heat distribution on the water pipe. This should be applied to the plastic pipe before laying the heating cable.

More information

Downloads