Suitable for

Conditionally suitable for

Please adhere to the local and national installation regulations (e.g. EN1717, DIN VDE0100)

Please order transformer separately!

Thermo-Quell Mod. 630

Thermo-Quell 630, 1 ball

Ref. 1300630

Ref. 1300630	Thermo-Quell 630, 1 ball
Ref. 1300640	Thermo-Quell 640, 2 balls

Catalogue page
B235

Technical data

Material
Plastic
Weight 32,00 kg
Length 70 cm
Width 60 cm
Height 56 cm

Frost-free down to -25 °C

Energy Free Frost-Protected Ball Waterers

How does a ball waterer operate?

Water comes from the ground at a temperature of about 10 °C and fills the drinking containers until the balls seal off the drinking holes. Whenever animals drink, the float valve allows the consumed water to be replaced. The energy of the replacement water flowing in keeps the water warm when it is cold, and cool when it is hot. By means of the special ball-valve system, and without any additional power requirements, fresh, clean water which is free from algae, is provided at both -30 °C as well as +30 °C.

By means of the patented ball-valve system, fresh, clean water is provided at both -30 °C as well as +30 °C
While the animal is drinking, the ball rolls away
The supply must come from below frost level
Water pressure: 1 to 5 bars
A minimum of 5 animals guarantees frost-free operation down to -15 °C, or with 15 animals down to -25 °C
Ready for hookup to ¾” (Thermo-Quell) water line
The ball waterer should be positioned, slightly raised, on a 15 cm thick concrete platform, each side of which is 30 cm wider than the drinker itself
Large drain holes allow regular, quick and complete cleaning of the trough