Electric Agridoor Pro, Height 3.10 m

Description

1. Establishing the dimensions 
Establish the clear width "B" of the opening and the planned height "H" to the bottom edge of the installation angle. If the established dimensions fall between 2 sizes in the price list, order the door with the next largest dimensions. When ordering indicate operating side: "Option R" (right) or "Option L" (left). The height of the Agridoor can be reduced in that some material can be left rolled on the uppermost tube. In the open condition Agridoors lose 100 mm in height from bottom edge of the installation angle. E.g., an Agridoor with the ordered height of 4.1 m (Hmax = 4.1 m) allows clear access of 4.00 m when rolled up.

2. Checking the installation site
Check that there are no obstructions (e.g. gutters, drain pipes, door fittings, etc.) which might interfere with the installation of the top angle or side guide rails

3. Bottom flap
Agridoors are delivered with a grey bottom flap of 14 cm as standard. Bottom flaps with a height of 34 cm and 51 cm are available at an additional price. 

4. Type of drive
Chain drive (5 s / m)

5. Colour
Special mesh available in green, blue, beige, grey, brown and black at no extra charge. 

The rollerdoor width has to be cut to size on site, for height adjustment any remainder can remain wound onto the upper tube.

Product reference

When operated with a remote control the safety edge kit is essential