Please adhere to the local and national installation regulations (e.g. EN1717, DIN VDE0100)
Suitable for circulation heaters
Float Valve Bowl, Mod. 127K-H
Technical data
-
Material
Plastic-coated cast iron
-
Weight 7,30 kg
-
Length 29 cm
-
Width 29 cm
-
Height 18 cm
-
Frost-free down to -20 °C
A drinking bowl for our little ones!
The new drinking bowl Model 127 K is suitable especially for smaller animals such as calves, foals and sheep. The float valve allows the animals to take water immediately and they do not have to operate a valve first. The drinking bowl is made of robust cast iron and has a plastic coating. The removable lid of the float valve is made of stainless steel. The bowls holds a volume of 2.4 litres, the ½" hookup allows a water flow up to 6 litres at 5 bar water pressure. The removable plug makes the feeder very easy to clean. For frost-free operation (up to -20° C), there is a variant with a heating element (24 V / 40 W).
- Drinking through of cast iron with plastic coating
- With pop-out drain plug
- 1/2" side hookup from the right or left
- Max. 5 bar, capacity 2.4 l
- Water flow up to 6 l/min at 5 bars
- With Installed heating element 24 V / 40 W
- With thermostat control (ON at 15°C; OFF at 25°C)
Product reference
Please order transformer separately
Practical tip
Protect water and electrical supply lines against damage caused by browsing animals
-
Package type:
-
Cargo type:
-
All temperatures given in respect of frost safety relate to the use in livestock buildings without direct influence from wind and weather