Circulation Heater, A10
Ref. 1010303 | Circulation Heater, Model 303 |
---|---|
Ref. 1010300 | Circulation Heater, Model 300 |
Ref. 1010317 | Circulation Heater, Model 317 |
Ref. 380115 | Circulation Heater, A10 |
-
Catalogue page
B231,C53
Technical data
-
Weight 7,00 kg
-
Length 70 cm
-
Width 16 cm
-
Height 15 cm
Great Value
With the additional electric heating, the circulation heating system ensures a frost-free water supply in your barn. Different systems can be used for applications ranging from small stables to large outdoor climate stables.
- Prerequisite: A water installation in which all drinking troughs are connected to each other via a water circuit
- On system switch-on the pump sets the water in constant circulation
- The heating element is controlled by the regulating thermostat
- Length of supply line: 200 m, including return line, is possible
- Pipe cross section from ½" to ¾"
- The water pipes should be additionally insulated
- 30 mA residual current device (RCD) required on site
- Note: Ensure that the supply line in which the water is not circulating is frost-protected by suitable measures (e.g. heater cable)
- With thermostat in the inflow line
- 1 piece 230 V / 3 kW heating element
- Circulation pump (85 W)
- Water hookup ¾"
- System length: max. 200 m
- Height difference (inflow/return line) max. 4 m
- Interior with plastic coating
- Pressure-tested stainless steel housing
- With thermometer, check valve
- Pressure relief valve
- Automatic vent valve
- 30 mA residual current device (RCD) required on site
- Water pressure: 4 bar max
Product reference
Ideal for use with drinking bowl models 25R, 115, 19R and Forstal with T-connectorMounting tip
Installation has to be done by qualified personnel
Practical tip
Protect water and heating pipes against browsing! You can use our two pipe protection models (Ref. 380108 and 380119) for this purpose.
-
Package type:
-
Cargo type:
- Do not forget to protect the supply line against freezing