Rollerscreen, Height 2.10 m

Quick access to buildings

There are 3 variants of wind protection doors: the Rollerscreen with spring mechanism, the Rapid Rollerdoor and Electric Rollerdoor. All systems allow for simple and rapid sealing of the building openings, while at the same time providing optimum ventilation and weather protection. Ideal for livestock buildings, machine and storage buildings.

1. Steel tubing
All Rollerscreens are delivered with 100 mm diameter tube.

2. Establishing the dimensions
The width and height of the ordered Rollerscreens dictate the actual width of the mesh. The tubes are 100 mm longer than the mesh width (50 mm on each side).
On Rollerscreens the spring mechanism is always on the left. Clearance height reduces by 100 mm.

3. Fitting adjustment
Rollerscreen: minimum width 2.35 m
The height can be varied by the positioning of the tube (superfluous net remains wrapped on the tube).

4. Bottom flap
Bottom flaps in heights of 14 cm, 34 cm and 51 cm can be supplied

5. Locking mechanism
All Rollerscreens are equipped with a locking mechanism which prevents an unintentional spring-back.
Safety information: the rewind spring is extremely strong. Please check when operating the Rollerscreens that there is nobody in the area of the
lower tube. If the rewind spring needs to be replaced, ensure that the spring retention screw is screwed in before removing the old spring.

6. Colour
Special mesh available in green, blue, beige, grey, brown and black at no extra charge

The mesh width can be cut to size on site, for height adjustment any remainder can remain wound onto the upper tube.