Please adhere to the local and national installation regulations (e.g. EN1717, DIN VDE0100)
Please order transformer separately!
Thermolac 75, 2 ball
-
Catalogue page
B218,C40
Technical data
-
Material
Plastic
-
Weight 36,00 kg
-
Length 99 cm
-
Width 66 cm
-
Height 53 cm
-
Frost-free down to -30 °C
Energy Free Frost-Protected Ball Waterers
How does a ball waterer operate?
Water comes from the ground at a temperature of about 10 °C and fills the drinking containers until the balls seal off the drinking holes. Whenever animals drink, the float valve allows the consumed water to be replaced. The energy of the replacement water flowing in keeps the water warm when it is cold, and cool when it is hot. By means of the special ball-valve system, and without any additional power requirements, fresh, clean water which is free from algae, is provided at both -30 °C as well as +30 °C.
- While the animal is drinking, the ball rolls away
- Water supply must come from below frost level
- Water pressure: 1 to 5 bars
- A minimum of 5 animals guarantees frost-free operation down to -15 °C, or with 15 animals down to -40 °C
- Prepared for connection to 1/2” water line
- The ball waterer should be positioned, slightly raised, on a 15 cm thick concrete platform, each side of which is 30 cm wider than the drinker itself
- Large drain openings allow regular, quick and complete cleaning of the trough
- Capacity: 75 l
- 25 - 40 animals
- Water flow: 38 l/min (at 5 bars)
- 1/2" hookup
Advantages
- 6 wing nuts for easy opening
- The float can be easily adjusted or turned off
- Simple connection (½”) to the water supply using armoured tubing
- Large drain opening (Ø 100 mm) for easy cleaning
-
Package type:
-
Cargo type:
-
All temperatures given in respect of frost safety relate to the use in livestock buildings without direct influence from wind and weather
433800-433801_Man_210x297_1c_ModThermolac40-ModThermolac75_130101.pdf
Download
